“who may not be quite as stubborn as I am” that is the most Linus torvalds thing to say. good to see his passive agressive nature being put in a press release.

my point is whether it is fatigued or it stopped working as a result of a large enough electrical impedance that current can’t pass through or god knows some other reason. You would have replaced the motherboard either way because of 10 other motherboard/component failures. in which case, buy a new laptop.

thinkpads are rapidly depreciative. They approximately depreciate linearly compared to a theoretically and practically non-depreciative product; The longer they are used (or just held in stock), the cheaper they become. I’ve found used thinkpads that are worth the same amount for a same spec’d framework motherboards. until integrated circuits become cheaper your just purchasing a more expensive thinkpad that’s easier to understand (from an upgrade perspective) for the user.

I mean, sure, but there needs to be a port the framework modules connect to. the framework uses the same, soldiered down, USB-C connection for the adapters to connect to. So the same issue arises as with a thinkpad and every other laptop.

if your trying to find an OS that is low on resources, there’s only one option: alpine linux. Yes it starts out as a TTY (no graphical environment) but they do have scripts to install the OS and a graphics environment of your choice.

the one concern is driver support, generally (unless using a popular distro such as zorin OS) driver support for Chromebooks are limited. I’ve tried getting alpine Linux on my Chromebook and can’t because the wifi card would not work for it.

that said, if you’re ready to manually configure driver support for it (which most likely will happen) the artix OS uses about 128 MB of memory. That said, if you have more, Linux will dynamically allocate more for core OS functionality

If you are comfortable using fedora or if you are fine learning about fedora, use fedora.

I personally wouldn’t use Ubuntu with it’s recent controversy in specific the “explicit AI features” planned to be implemented within ubuntu. I’d suggest avoiding it out of privacy concerns even if it runs locally on your system.

the general trend for AI adoption, is to make it accessible for anyone to onboard, and then slowly control the users by (for example) making users connect to their servers to use their chatbot which then they can train, and have a better profile of you.

Canonical never mentioned that, in fact they mentioned quite the inverse. but any implementation of an AI chatbot, Tech companies aren’t doing it because of how revolutionary AI is. The AI is the product and your data is what they want.

I’m not saying canonical is pursuing that initiative, but that’s generally how it goes for most tech companies. Don’t take my word for it, ask yourself, “what service does Ubuntu provide? what financial backing (sponsorships) do they have?” I’ve looked far and wide and the only thing I’ve found is, they offer a free OS install as their consumer grade product, and a subscription service to their enterprise network that is clearly not a sustainable business model (from an engineering perspective) for a multi-thousand employee company.

i’ve used both void and alpine before switching back to arch. Alpine is great, but it doesn’t support glibc and that compatibility gave me issues installing applications on my laptop. Sure I could setup chroot or a contanarized environment but void offered both options glibc and musl.

thanks, I’m going to set it as a banner on my linkedin.

insert image of “your Linux installation is fucked”

well I could give you a solution, generally with x86_64 architecture they use a lot more wattage than macbooks, m-chip SOC’s (system-on-chip) utilize about 30W of energy whereas just a modern x86_64 CPU utilize 15W. which means you have a 15W overhead for your GPU and memory generally speaking.

So the entire reason your getting less battery life is OS required applications for it to function, and you. So if you minimize the amount of wattage (ideally building a linux system from scratch) you can optimize it to consume less resources.

I did this with my personal laptop, installed arch and mangoWM, didn’t even bother with a display manager or network manager (still use iwctl). on idle it uses about 600 MB, and I’ve beaten the m1. my point is not to compare or benchmark the macbook, but to just show you that you can maximize battery life with a little tinkering. So long as you are comfortable doing it.

I have used pop_os and cosmic DE it should be noted that is a beta version of pop_is, which means there are plenty of bugs, which means there are still a lot of optimizations. the fact you could get 12 hour battery is kinda surprising especially with a nvidia GPU.

so people reasonings are, that if you don’t use all memory then it’s just going to waste. which is true, but you also need to take into account the applications I use, ~10 GB of memory is used when i run vivado/vitis synthesis and bitstream.

the second thing i was going to add is, Do you know what also makes ram redundant? when the laptop is fucking dead. Which is ultimately why I’m trying to optimize it resource wise to extend battery life.

that said, i’ve optimized it to where I can beat the m1 macbook on idle. again, not something that is a benchmark, but to say an engineering student beat a trillion dollar company. I continue to smear that in apple fanboys faces as just a massive “fuck you.”

ontop of other user comments where it boils down to trust in the maintainer and code reviewers of the project, another reason depends on the use case that you plan on using your Linux system. for example, if I were to setup a nextcloud server, i’d generally go with alpine for it’s lightweight design, or Debian for it’s stability. I wouldn’t necessarily use Kali Linux, because with those features it also uses a lot of resources for it to function, and I don’t need that for a server.

in terms of my personal device I generally build those from the tty and add other modules (like DE, utils, etc…) to give it more functionality. Much like my servers I like to have my laptop optimized – take as minimal resources as possible – which is a rather controversial take after seeing users bash at me that I’m not taking advantage of all my memory. anyways, I don’t think there is a specific distro that has everything that I want. I want a system that works that doesn’t use 2 GB from the DE alone and that is accomplished by adding the modules myself.

I don’t trust any other sub-distro other than myself. I generally go with one of the corporate base tty installer (arch) and I build the system from that. I’m not going to switch to say cachy OS for it’s aesthetics, or ease of use, I couldn’t really care less.

yes, and I couldn’t really care what it was intended to be used for. clearly I could still use it as a WiFi utility posts installation.

As per the arch wiki it says “iwd is a wireless dameon for Linux written by Intel.” “The core goal of the project is to optimize resources utilization by not depending on external libraries.”

the point of why I’m using it is for that exact reason. it does the same thing every other WiFi GUI/TUI out there. unless there is a vulnerability/security risk of using iwd, I couldn’t really care less about the other options, even if that means manually configuring enterprise and public networks.

you do know he was an engineering major?

mangoWM. my workload requires a lot of resources like vivado/vitis. the more resources I have available the better. I’ve no where near customized my WM (FFS, I’m still using iwctl to configure WiFi), that said it does run great, using about 560 MB on idle.